Connect HP Deskjet 3636 to WiFi
HP Deskjet 3636 can not access the Wi-Fi network when users change their wi-fi password Often, when users change their Wi-Fi password, their HP Deskjet 3636 printer can not enter the Wi-Fi network. HP Deskjet 3636 printer operates fairly well with USB and gets Wi-Fi access until its user changes its password , follow below method to Connect HP Deskjet 3636 to WiFi
Method 1: users are unable to connect their HP Deskjet 3636 printers to the Wi-Fi network, even after following the steps below:
Step 1: open the HP Deskjet 3636 software as a first step and configure the printer for wireless configuration.
Step 2: They receive the following response after selecting the SSID and providing the password: SSID can not be found / FAIL.
Step 3: Even after HP Deskjet 3636 printers face the router’s forward portion; however, extra phones receive wi-fi access.
Step 4: Even after a separate laptop has configured the printer.
Step 5: The user can view his printer after installing a firmware update and running this configuration, but not press it; moreover, it says that the status of the firmware is not available.
Step 6: Print and physician software unsuccessful attempt.
Step 7: Ineffective outcome with user router factory reset.
Step 8: Futile offer for three seconds to reset Wi-Fi settings to press the Wi-Fi button and X button.
Step 9: When the user connects HP Deskjet 3636 printer to another Wi-Fi network and router, the message shows’ Not Finding the SSID Name.’
Step 10: Steps to assist access the Wi-Fi network of HP Deskjet 3636 after the user changes the wi-fi password.
Method 2: This is a Few Steps to Make It Easier for a HP Deskjet 3636 Printer to Get Access to a Wi-Fi Network After Modifying a Wi-Fi Password:
Step 1: Restore the default network on the printer.
Step 2: Use the USB cable to install the printer and then alter the USB connected printer to Wireless to pick up the network.
Step 3: Here are the steps for this:
- Moving to the Connectivity tab; choose “USB.”
- Join the USB cable and finish the setup of the printer.
- If the user wants to replace a USB with a wireless network connection, use the Printer Setup & Software tool that is installed in conjunction with the printer software.
- Look for the name of the printer before you click.
- Opens the software for the printer.
- Click Tools, then click Setup & Software Device.
- Choose the choice “Convert a wireless USB printer.”
- To finish the setup, follow the on-screen directions.
Method 3: Things HP DeskJet 3636 Printer users can do when facing Wi-Fi connectivity problems: the following steps involve the user to break network and Internet links briefly and restart their pcs. To start with, before calling a halt, customers must wrap up any assignments or downloads in progress.
Some suggestions that can help users solve this problem are listed below.
- To turn off, press the Power button on the printer.
- Remove the energy cord from the printer’s rear end.
- Remove the wireless router energy cord.
- Turn off your laptop.
- Approximately 30 seconds pause.
- The energy cord is linked to the wireless router.
- Stop for 30 seconds or complete fitting and setting of the router.
- Turn on your laptop.
- Hang around until you reload your laptop.
- Attach the energy cord to the printer’s back.
- Turn on the printer.
Method 4: Assigning a static IP to solve HP DeskJet 3636 Printer and Wi-Fi connectivity issues Go along with the steps below:
Step 1: find the printer’s IP address. To get hold of the IP address, the user can contact the “wireless” icon in the printer control panel.
Step 2: Key in your web browser’s IP address to get your computer’s EWS printer page.
Step 3: Moving to the tab “Network.”
Step 4: Choose “Network protocols” under General. Step 5: Choose “Only enable IPv4” (or similar).
Step 6: Apply the configuration.
Step 7: See the tab “Network.”
Step 8: Click on “Wireless (802.11)” button.
Step 9: Next click on “Network Address (IPv4).”
Step 10: Then click on the radio button “Manual IP.”
Step 11: Then click on “Suggest a manual IP address” to get your printer’s manual IP address.
Step 12: Click on the radio button “Manual DNS Server.” Write 8.8.8.8 under preferred guidance and write 8.8.4.4 (This is the Google DNS server address) Step 13 under instruction alternate: the moment the method finishes, the printer drivers reinstall.
Method 5: Essential actions for solving HP DeskJet 3636 Printer and Wi-Fi connectivity issues Comply with the following steps:
- Remove the USB cable (if attached) from the printer and computer.
- Go to the Control Panel and look up–Programs there.
- Before uninstalling, select all HP Envy printer entries.
- Reboot your PC.
Next, press “Wireless” and stick to the on-screen instructions to complete the setup in the link type window.